Painting an oak staircase: paint, stain or two-tone?

Quick answer

Sand, prime properly, then paint, stain or both.

Most dated staircases in Toronto homes are orange or dark oak. You can paint the whole thing, keep the wood and restain it, or go two-tone: painted risers, spindles and trim with stained treads. Whichever you choose, the result depends on the prep: a careful sand by hand and a primer that stops the oak’s grain and tannins from bleeding through the paint.

The three common options
Paint it allBright and modern; the quickest of the three
Restain the woodKeeps the grain; matching a stain takes more steps
Two-tonePainted risers, spindles and trim, stained or dark treads
Every optionHand sanding and the right primer first
01 · Decide

Paint, stain or two-tone?

A

Paint everything

Railings, spindles, risers, stringers and trim in one colour, usually white. It lightens a dark hall more than anything else.

B

Restain

Sanded back and stained a new colour, or matched to new floors. It keeps the wood look, but matching a stain takes more steps than painting.

C

Two-tone

Painted risers, spindles, stringers and trim with darker treads. It is the classic look, and it keeps the most-walked surface in wood tones.

Staircase painted white with dark treads
Real project · Midtown Toronto · Homeowner · 2024A 1934 oak staircase, brought into this centuryIn this 1934 Midtown home, the original dark oak woodwork was taken to a crisp white with dark treads, so the hall is bright but keeps its character.See the project
02 · Prep

Why oak needs the right primer

Oak has an open grain and natural tannins. Paint straight over it and the grain shows through, and the old finish or the tannins can bleed into a white topcoat as a yellow or orange tint. That is why the prep matters more than the paint.

  1. 01Protect. Floors and walls around the stairs are covered, because sanding a staircase makes dust.
  2. 02Sand by hand. Railings, spindles and treads are sanded by hand. Machines can’t get into the turns and corners of a staircase.
  3. 03Fill. Dents, gaps and old nail holes are filled so they don’t show under the paint.
  4. 04Prime. A stain-blocking primer goes on before any colour.
  5. 05Finish coats. Paint, stain or clear coat, with drying time between coats so the finish wears well.
Bright living room with white walls and white window trim after painting
Real project · Toronto · Homeowner · 2026Dark trim to bright whiteOn this Toronto character home, all the dark stained trim got a coat of Zinsser B-I-N shellac-based primer first, so the old stain can’t bleed through the new white paint.See the project
03 · Finish

How many coats does a painted staircase need?

Going from dark wood to white takes more than one coat over the primer. In a Yonge and Eglinton foyer, the oak panelling and staircase got three coats of white paint for a solid, even finish.

Foyer with oak panelling and staircase painted white

Railings and handrails get handled every day, so they need a hard-wearing finish and time to cure. Paint is dry to the touch long before it is fully hard, so go easy on the handrail for the first few weeks.

04 · Ideas

Real staircases we’ve finished

  • Navy and white. A white foyer staircase given deep navy wainscoting and dark treads, our first project of 2025.
  • White risers and a runner. Worn, patchy oak stairs where the risers, stringers and trim were painted a crisp white, ready for a new herringbone runner.
  • Painted with a black handrail. In a South Burlington custom home, the oak staircase was refinished in white with a black handrail, along with the full interior.
  • A floating stair. In a Mississauga custom home, we finished a floating staircase working alongside the builder, Rymes Fine Homes.
Staircase with navy wainscoting and dark treads
Real project · Toronto · Homeowner · 2025A foyer staircase in deep navyDeep navy wainscoting and dark treads against crisp white: a classic look that hides scuffs better than all-white.See the project

See more on our staircase and wood refinishing page.

05 · Beyond the stairs

Built-ins, trim and doors

The same prep works on the rest of the woodwork in older homes: oak built-ins, door and window trim, baseboards and panelling. Doing the staircase and trim together keeps the hall and the rooms off it looking like one finished space.

White built-in shelving and desk
Real project · Toronto · Homeowner · 2025Oak built-ins, painted whiteOrange oak built-ins sanded, repaired, primed and finished in a lighter colour, without replacing any of the cabinetry.See the project

Thinking about the kitchen too? See what it costs to paint kitchen cabinets in Toronto, or get a quote.

Questions people ask

FAQ

Can you paint an oak staircase white?

Yes, it is one of our most common jobs. Oak needs a good sand and a stain-blocking primer so the grain and tannins don’t bleed through the white.

Should I paint the treads?

Treads take the most wear. Many people keep them stained or dark and paint the risers, spindles and trim. Paul can show you both options for your stairs.

Can you match a stain to new floors?

Yes. On one Toronto staircase we took natural wood to white, then matched the stain to brand-new flooring in a two-step process.

Is painting a staircase cheaper than restaining it?

Painting is usually quicker, because matching a stain takes more steps. The price also depends on how much woodwork there is and the condition of the old finish. Paul gives a free quote after seeing it.

Do you paint staircases in Mississauga?

Yes. We’re based in Etobicoke, right next door, and work on staircases across Toronto, Mississauga, Oakville and the GTA.

Paul Marchesseau

Send Paul a photo of your stairs.

A couple of photos is enough to start. He’ll tell you what the wood needs and send a free quote.

Talk soon, Paul
Text PaulCallQuote