What affects the price
Number of doors and drawers
Each door and drawer front is prepped and sprayed on both sides, so the count matters more than the size of the kitchen.
Condition of the wood
Grease, water damage, peeling old finish and dents all add prep time. Kitchen cabinets near the stove need a thorough degrease before anything else.
Wood type and grain
Oak has an open grain that shows through paint. Some people like the texture; others want it smooth, which takes extra filling. Maple and MDF give a smoother finish with less work.
Colours
One colour is the most efficient. Two-tone kitchens, like navy lowers and white uppers, or an island in a second colour, add time.
Extras
Cabinet interiors, glass doors, crown moulding, open shelving and new hardware that needs the old holes filled are usually separate lines on the quote.
How a proper cabinet job is done
Chipping almost always comes from poor prep, not from the paint. This is how we do it:
- 01Remove and label. Doors, drawer fronts and hardware come off and are labelled so everything goes back where it was.
- 02Degrease and clean. Kitchen grease stops paint from bonding, so every surface is cleaned first.
- 03Sand and repair. Surfaces are sanded to give the primer something to grip, and dents and old hardware holes are filled.
- 04Bonding primer. A high-bonding primer goes on before any finish coat. This is the step that stops chipping.
- 05Spray the finish. Finish coats are sprayed for a smooth, factory-like look, with proper drying time between coats.
- 06Reinstall and adjust. Doors go back on and are adjusted. Paint keeps curing for a few weeks, so go easy on the cabinets at first.

Satin or semi-gloss for cabinets?
Most of our clients choose satin. It looks rich, hides fingerprints and wipes clean. Semi-gloss is shinier and very durable, but it shows every flaw in the wood. Paul brings samples so you can see both on your own doors.

Two-tone kitchens are popular too. In a cottage kitchen we took knotty pine cabinets to navy lowers and white uppers, and painted the armoire and dining chairs to match.
Paint or replace your cabinets?
Painting makes sense when the cabinet boxes are solid, the doors are in good shape and you are happy with the layout. You keep your countertops and avoid demolition, and the kitchen is usable again much sooner.
Replacing makes more sense when the boxes are water-damaged or falling apart, or when you want to change the layout. If that is the case, Paul will tell you honestly instead of selling you a paint job.

FAQ
How much does it cost to paint kitchen cabinets in Toronto?
It depends on the number of doors and drawers, the condition of the wood, the number of colours and extras like interiors or glass doors. Paul gives a free quote after a quick look.
How long does it take to paint kitchen cabinets?
It depends on the size of the kitchen. Doors and drawers come off, get degreased, sanded, primed and sprayed, with drying time between coats. Paul gives you a schedule with your quote.
Will painted cabinets chip?
Not if they are prepped properly. Chipping comes from skipping the degreasing, sanding or bonding primer. Give the paint a few weeks to cure fully before heavy use.
Can you paint oak cabinets?
Yes. We sprayed oak kitchen cabinets white in a South Burlington custom home. Oak grain shows through paint unless it is filled first, so decide whether you want that texture.
Is spraying better than brushing cabinets?
Spraying gives the smoothest, most even finish, with no brush marks, which is why we spray cabinet doors and drawers.








