Limewash brick in Toronto: what to know first

Quick answer

Bare, porous brick. Then layers, by hand.

Limewash is lime, water and natural pigment. It soaks into bare brick and stone instead of forming a film like paint, and dries to a soft, chalky, slightly cloudy look. It works best on brick that has never been painted or sealed. It is meant to age: over the years it softens and lets more brick show through, and a fresh coat brings it back.

The basics
Works onBare, unsealed brick, stone and masonry
Painted or sealed brickUsually stripped first, or a mineral primer
LookSoft and cloudy, or built up to more solid
Over timeSoftens and weathers; recoat to refresh
01 · Basics

What limewash is, and how it differs from paint

Paint sits on top of brick as a film. Limewash is a mineral finish: it soaks into the brick, so it stays breathable and the texture of the masonry still shows through. The result has movement and depth, with light and dark areas, rather than one flat colour.

A

Limewash

Breathable, mineral, soft and cloudy. Lets the brick’s texture show. Ages and softens over time.

B

Masonry paint

A more uniform, solid colour. Covers the brick’s variation. Wears by fading and, eventually, peeling.

Neither is better for every house. Paul can put both on your brick so you can see them side by side before you decide.

02 · Check

Can your brick be limewashed?

Limewash needs bare, porous masonry to bond. Before quoting, we check three things:

  • Has the brick ever been painted or sealed? If so, it usually has to be stripped first, or treated with a primer made for mineral finishes.
  • Is the brick sound? Loose or crumbling brick and failing mortar should be repaired before any finish goes on.
  • Is it clean? Dirt, efflorescence and old residue are cleaned off so the limewash soaks in evenly.

Then we do a test patch, so you can see the colour and coverage on your own brick before we start.

03 · Process

How limewash is applied

  1. 01Walkthrough. Paul looks at the brick, the height and access, and the look you want.
  2. 02Test and prep. Clean the brick and do a test patch for colour and coverage.
  3. 03Apply in layers. Limewash goes on wet, by brush, in layers. Fewer layers keep it soft and washed; more layers build a more solid look.
  4. 04Final walk. We walk the job with you and touch up anything you spot.

Height matters for the price: a fireplace or feature wall is quick to reach, while second and third storeys need ladders, planks or a lift.

04 · Upkeep

How limewash ages in Toronto weather

Limewash is long-lasting, but it is designed to weather. Rain, freeze-thaw and sun slowly soften it, especially on walls and ledges that take the most rain, so more brick shows through over the years. Many people like that look. When you want it brighter again, a fresh coat brings it back without stripping.

Like any exterior work, limewash goes on in mild, dry weather, so in Toronto it is best planned for spring to early fall. See how long exterior paint lasts in Ontario for how the climate affects exterior finishes in general.

05 · Inside

Fireplaces and interior feature walls

Limewash isn’t only for exteriors. Brick fireplaces and interior brick feature walls are some of the most popular places for it, because the soft, mineral look suits a living room and the job is small enough to finish quickly.

See our limewash service and other specialty finishes, or get a quote.

Questions people ask

FAQ

Can you limewash painted brick?

Limewash needs bare, porous masonry. Painted or sealed brick usually has to be stripped first, or treated with a primer made for mineral finishes. Paul checks your brick and tells you what it needs.

Is limewash permanent?

It’s long-lasting but meant to age. Over the years it softens and lets more brick show, especially where rain hits it. A fresh coat brings it back.

Limewash or paint for brick?

Limewash is breathable and soft-looking and lets the brick’s texture show. Paint gives a more uniform, solid colour. We can show you both on your brick.

Can you limewash a brick fireplace?

Yes. Fireplaces and interior brick feature walls are some of the most popular places for limewash.

Where do you do limewash?

We’re based in Etobicoke and do limewash across Toronto, East York, Leaside, Mississauga, Vaughan and the rest of the GTA.

Paul Marchesseau

See limewash on your own brick.

Text Paul a few photos of the brick. He’ll check it and do a test patch before you decide.

Talk soon, Paul
Text PaulCallQuote